Apc Back Ups Bx1300lcd Replacement Battery

Search For Apc Back Ups Bx1300lcd Replacement Battery @ Amazon.com

The SU700US backups unit is APC’s Smart Ups 700 backup box. The SU700US substitute battery that we will be installing is comprised of two (2) gp1272F2 sealed lead acid batteries. These batteries are 12v 7.2 ah sla batteries fabricated by CSB battery, which in this case is the OEM apc substitute battery for the unit (and a good deal of of apc’s backups units).

To begin, you must original remove the plastic face plate from the unit (where the indicator lights are located). Once this face plate is removed, you will see a little metal door secured to the unit by two little screws at the very top. Once these screws are removed, you will see that the rbc5 battery pack is connected to the unit by two wires at either end of the battery. The primary wire that ought to always be disconnected original is the red cable leading to the positive, then the negative in order to stay clear from any possibleness of sparking. Once these are removed, the rbc5 battery pack will have to just slide out of the unit.

Assuming that you have your rbc5 alternate battery ready to go, you slide the battery pack far sufficient into the unit so as to connect the positive spade connector, then slide the battery in the rest of the way to connect the negative. Seal up the metal door with the two screws you took out earlier (which hopefully you have not lost:) ), and replace the front plastic plate. You have with great success installed your very own su700us substitute battery!